Plumber & GasfitterRegister of licensed contractors

Advice / Plumbing

Backflow prevention: who needs a device and who may test it

A backflow prevention device stops water flowing backwards from a property into the drinking water main. Testable devices must be registered with the local council and tested at least once every calendar year by a plumber with a backflow prevention endorsement. In Brisbane the tester sends results to Council within 10 business days.

Where devices are fitted

Brisbane City Council's backflow program gives the clearest public list. Devices are usually fitted to irrigation systems connected to mains water, fire hose reels and hydrants, commercial or industrial machinery connected to mains, water outlets near pollutants, grease traps or chemicals, and underground rainwater tanks with mains water backup.

Only some devices are testable. A testable device is needed when the contamination risk is medium or high. Most ordinary houses do not have one, although a house with an underground tank topped up from the mains may.

The yearly test

Brisbane requires testable devices to be tested at least once every calendar year, and its reminder notices ask owners to arrange the test by 31 December. The test must be done by an endorsed backflow tester, who submits the results to Council. Owners pay an annual registration fee per testable device, and unpaid fees are added to the next year's fee. The council says owners may be fined up to 20 penalty units for each device that is not tested or registered.

Other councils run the same kind of program under their own forms and fees. If you manage a commercial property outside Brisbane, check that council's plumbing page for its register.

The endorsement to ask about

A general plumbing licence is not enough for the test. QBCC lists backflow prevention as a plumber endorsement that allows testing, commissioning and maintaining backflow prevention devices. It is the one endorsement that expires: QBCC says holders must requalify every five years.

The endorsement is attached to the plumber's occupational licence, which is a different record from the contractor register on this site. So use our lists to find contractors near you, then ask each one whether a currently endorsed tester will attend. Brisbane City Council notes that endorsed testers are listed by the Backflow Prevention Association of Australia.

New installations

Two forms are in play when a device goes in. In Brisbane a new testable device is registered with Council on Form 9, the registration and report on inspection and testing of backflow prevention devices. The licensed plumber who installs it must also lodge a Form 4 with QBCC, because the installation is notifiable work.

Short answers

Does my house need backflow testing every year?

Only if it has a testable device. Brisbane City Council says a testable device is needed where the contamination risk is medium or high, for example an underground rainwater tank with mains backup.

Can any licensed plumber test a backflow device?

No. The tester needs QBCC's backflow prevention endorsement, which must be requalified every five years.

What form records the test in Brisbane?

Form 9. The endorsed tester submits it to Council within 10 business days of the test.

Sources

Written by the Plumber & Gasfitter editorial desk from the sources listed, all read in November 2026. This is general information for Queensland and not legal advice. Rules change; the linked regulator pages are the authority.

Related guides