Advice / Plumbing
WaterMark: checking a tap, valve or fitting before your plumber installs it
WaterMark is a mandatory certification scheme for plumbing and drainage products of certain types, administered by the Australian Building Codes Board. Certified products carry the WaterMark symbol on the product itself, and you can check any model in the free WaterMark Product Database before you buy it.
What the scheme is
The Australian Building Codes Board (ABCB) administers and manages the scheme. Its site describes WaterMark as a mandatory scheme for plumbing and drainage products of a certain type, intended to confirm that products are fit for purpose and authorised for use in plumbing and drainage installations.
Which products are caught is set by a list. The ABCB's consumer page says the National Construction Code requires any plumbing or drainage product of a type listed on the WaterMark Schedule of Products to be certified. A second list, the Schedule of Excluded Products, names what is outside the scheme.
QBCC's home owner guide explains the mechanics for Queensland readers. Products are assessed by certified bodies against the relevant product specifications or standards. Products that pass are given WaterMark certification and must be marked with the WaterMark trademark symbol on the product itself.
Checking a product
The ABCB's WaterMark site hosts a product search. You can look a product up by licence or certificate number, model ID, model name, brand name, product type, specification or licence holder. One quirk: licence numbers are six digits, so a shorter number needs leading zeros added.
Do this before buying tapware from an overseas marketplace. A handsome tap with no listing is a tap your plumber should decline to connect.
Why plumbers push back
The ABCB states that certified products must be installed by a licensed plumbing practitioner, and advises consumers to confirm that their plumber is appropriately licensed and uses certified products. The plumber is the one who signs for the installation. When a plumber refuses to fit a mixer that a customer supplied, this scheme is usually the reason, and it is the plumber doing the job properly.
Fit matters as well as the stamp. QBCC's guide adds that products must be fit for the purpose for which they are intended to be used. A certified valve installed in the wrong application is still a defect.
Supplying your own fixtures
If you want to buy the fixtures yourself, a workable routine is:
- Send your plumber the brand and model before you order.
- Search the model in the WaterMark Product Database and keep a screenshot of the listing.
- Check the product itself carries the symbol when it arrives.
Reporting a problem
The ABCB says non-certified or illegally fitted products can be reported to the relevant state or territory plumbing administration. In Queensland the licensing and complaints body for plumbing is QBCC.
Short answers
Is WaterMark compulsory or a quality badge?
Compulsory. The ABCB describes it as a mandatory scheme for plumbing and drainage products of a certain type.
Where is the WaterMark symbol shown?
QBCC's guide says all products given WaterMark certification must be marked with the trademark symbol on the product itself.
Does every plumbing product need it?
No. Only product types on the WaterMark Schedule of Products. The ABCB also publishes a Schedule of Excluded Products.
Sources
- Australian Building Codes Board: WaterMark Certification Scheme and product search
- Australian Building Codes Board: WaterMark for consumers
- QBCC: Home Owner's Guide to Plumbing Matters, May 2025 (PDF)
Written by the Plumber & Gasfitter editorial desk from the sources listed, all read in November 2026. This is general information for Queensland and not legal advice. Rules change; the linked regulator pages are the authority.